In brief

In brief

News from :

November 2017

Hauts-de-Seine

As part of the Greater Paris project and the construction of the future metro line 15 in Issy-les-Moulineaux, SIAAP entrusted the Special Works Division with reinforcing the structure of the ES2B (south outfall, 2nd branch) by laying 120m of cast concrete.

November 2017

Mali

On behalf of SOMAPEP, SADE Mali will build a 6,000m³ reinforced concrete reservoir in Outakoulou and lay 5km of drinking water discharge network from the purification plant in Missabougou

November 2017

Côte d’Ivoire

As part of the city of Abidjan drinking water supply works, from the Saint-Viateur harness field, ONEP entrusted Franzetti (SADE subsidiary) with laying 10.6km of 300mm to 500mm-diameter ductile cast iron pipes.

GRDF awarded SADE a building connection and service pipe - standpipe repair contract, in a hundred or so municipalities in the southern outer suburbs of the Île-de-France region. SADE will also provide standby services and carry out emergency works (excavation works and repairs).

November 2017

Val-de-Marne

On behalf of RTE and as part of the trenchless works for the 225 kV underground connection on the Chevilly-Coriolis line, the Special Works Division will carry out 1,200mm-diameter microtunnel boring and use the vertical kirving pipe-jacking technique to dig a 12m-deep manhole.

November 2017

Haute-Savoie

On behalf of SNCF and as part of the compliance works on the wastewater networks on the SNCF site in Saint-Gervais-les-Bains-Le Fayet, SADE will carry out 3 pipe-jackings under railway lines (two 400mm and one 300mm-diameter), build 3 backflow stations and a hydrocarbon separator, and lay 2,704m of wastewater gravity (200mm and 160mm-diameter), backflow (90mm, 75mm and 63mm-diameter), drinking water, fire safety and gas (63mm-diameter) networks.

November 2017

Essonne

In Evry, as part of the creation of a 500mm-diameter pre-insulated steel interconnection for the Southern Greater Paris district heating network, Energie Positive selected SADE to lay 600m of pipeline. DGPF contributed to winning this contract.

November 2017

Hauts-de-Seine

For the supplying of 32 wash hydrants to the Clichy maintenance centre, the SNCF selected SADE for slip-lining a 100mm-diameter pipe with a 63mm-diameter HDPE pipeline using a winch.

November 2017

Gironde

In Bassens, the Michelin Simorep factory entrusted SADE with replacing a 150m-long, 200mm-diameter steel pipe by pipe-jacking (300mm-diameter).

November 2017

Rhône

SYTRAL (i.e. the Rhône and Lyon area joint transport authority) selected GANTELET-GALABERTHIER (SADE subsidiary) for civil engineering works (installation of prefabricated washrooms), at the terminus of the TCL network bus lines in the Greater Lyon area.

SADE - 23-25 av. du Docteur Lannelongue - CS 51450 - 75685 Paris Cedex 14